I LOVE making wreaths, it is definitely a fun and useful hobby to have. I made a deco mesh wreath for the first time at Christmas and everyone who came over loved it!!
So I wanted to post a tutorial of how to make one, whether it is for this upcoming Valentine’s day, St. Patrick’s day, Easter etc.
I also made a cute wreath for my house, which has address numbers on them and I think it is the perfect year-round wreath, as well as the perfect gift for newlyweds, people who have everything, or as a housewarming gift!
Deco Mesh Wreath Materials List:
– 18” wire wreath form, or whatever is available
– Pipe cleaner that matches the deco mesh you are using ( I used about 25 red pipe cleaners)
– 21” deco mesh ribbon ( this will be the main color)
– 10” deco mesh ribbon as your filler/ accent color (mine was pink)
– filler of your choice, I used what was available at Michael’s
- Lay wreath on the floor and begin to tie the pipe cleaners all around the wire form. There is no “right” way to do this, I copied a website’s picture of a working wreath they sell that has attached wire already on it, and it sells for $15- mine cost $3!
- I tied 2 pipe cleaners on the outer sections and 1 on the inner ring, leaving the two middle ones empty- this gets covered by the mesh anyway.
- Take your 21” deco mesh and attach it to the tie on the inner ring and secure it.
4. Once one end is secured, you will pull the mesh into a bunch which looks like a poof (hard to explain) and then tie the poof onto the next pipe cleaner. Continue to gather and tie little poofs onto each pipe cleaner inside the inner ring. It will look like this as you are going along.
5. Once you have filled the inner ring, continue on to the outer ring with the same bunching and securing process. You can do this without cutting the mesh.
6. Now that the whole wreath is filled (both inner and outer rings) you can get your smaller 10” mesh and add it in just like you did with the first color. This can be sporadic, or you can fill most of the wreath with it- its all up to you. The pipe cleaner should be long and you will be able to tie the second mesh just like you did the first because the ends will be sticking out.
7. Now all the is left to do is add the filler, you can see it in the back of this last picture. I grabbed little hearts from the valentine’s section at Michael’s and I cut them using wire cutters and tied them into the pipe cleaner. I also added some hot pink ribbon randomly into the wreath, I just tied it to the wire and let the two ends stick out for extra color. (You could tie bows if you want a cuter effect.)
Now you have the choice if you want to cut the pipe cleaner short so it doesn’t show, or you can leave it out or curl it with a pencil. I liked Seeing it since it coordinated with the pink and red theme- it added an extra flare to the wreath!
Here is the final product, and picture of one my friend made with me while doing this tutorial! Its super easy!!
**Now if you want to make a Christmas wreath out of an artificial Christmas tree wreath form its much easier, it is the SAME process only you don’t need to add pipe cleaners to have your mesh attach to- you just use the branches to wrap the mesh around.
Here are some pictures of how I made the Christmas one at my house, its not the best picture but its so gorgeous!
Now onto the address wreath
Here is what you will need:
– 18” twig wreath
– Flowers for the side
– House numbers from Lowes or other hardware store
– Plastic spray paint, if using plastic numbers and a plastic primer.
– Hot glue gun & glue sticks
1. I sprayed the numbers with two coats of plastic primer waiting 10 minutes after each coat like the can suggested (even though the paint was outdoor).
2. Sprayed with two coats of blue spray paint, waiting 30 minutes after each coat like the can suggested.
3. While the paint was drying I cut the flowers with wire cutters leaving a small tip that could poke through the twig on the wreath to practice placement, and arranged them on the wreath how I liked them and then got out the hot glue gun.
4. Glue each flower down on the twig wreath where you placed them. They will be secure after this.
5. Get the numbers once they are dry and place them on the wreath and glue them, and TA-DA you’re done!! You have a great gift or something great for your house!!
Thanks, I hope you enjoyed the tutorial. Shoot me any questions you have!